How Long Does Brake Pad Replacement Take? Details

As a conscious car owner, you always want to ensure your car brake system is working smoothly. Otherwise, you may experience brake failure, which can result in accidents.

How long does brake pad replacement take? It’s hard to answer because there’s no hard and fast rule about the amount of time needed for changing brake pads. Several components are included inside a brake pad. Generally, replacing a brake pad may take 30 minutes to 1 hour based on the mechanic’s skills.

brake pad replacement time

How Long Does Brake Pad Replacement Take

A lot of things need to be considered to estimate how long does it take to change brake pads exactly. Many renowned repair facilities use labor guides to determine the preparation for brake pads replacement.

However, they should remember that quotation over the phone isn’t a realistic approach to finding time for repairing brake rotors.

For example, if a car owner wants to do a replacement brake pad of his own, the actual time depends on his mechanical skills and whether he has all the necessary tools for braking.

However, the mess can be more for a DIY brake job if you struggle to fix other components. As you know, first you’ll remove the wheels, then take out calipers and finally remove and change new brake pads.

When you take your vehicle to a professional mechanical shop, they’ll take care of each component of a brake pad. This’ll ensure a better lifespan after you have brake rotors replaced.

What’s more, the type of vehicle you want to replace will determine time to replace brake pads. Some vehicles may have easy mechanisms to remove wheel brakes, while others may have a little bit complicated mechanism.

Plus, you must be wondering the brake job replacement time taken for the entire vehicle. In this case, you may already know how many brake pads per wheel.

Since each tire has two pads, you’ve to remove and replace eight brake pads of four wheels. Thus, it takes a considerable amount of time to change all of them.

But, you may don’t need to replace all of them at a time. Figuring out which one to replace is what you need to do. But, it’s necessary to determine the best time to replace brakes.

Brake pad replacement time in a garage

In a car workshop, the mechanics will extract the caliper slides from the caliper, clean them properly, give proper lubrication, and then replace the brake p[arts.

Additionally, rotors are often necessary to replace while changing brake pads, but many mechanics usually pay no attention to this factor.

Aside from that, brake pad retaining clips sometimes need to be removed, which hold the pad. The hardware clips might have a lot of rust and corrosion. They’ll use a unique tool to grind off the substances.

Then, lubricant is used on the clips, appropriately cleaned, and replaced with the pads. After replacing the parts successfully, the mechanic may use another lubricant for better functionality. This prevents corrosion for an extended time.

Most of the time, manufacturers provide a special lubricant in the box of braking items. But not all mechanical shops will use them. They may disregard it. So, quality service takes time.

If other components of the brakes are damaged, you’ve to replace them too. Otherwise, you’ll fail to drive the car smoothly. So, the more damaged components, the more time it’ll take to change.

How to Sustain Long Lifespan for Brake Pads

Though brake pads will not last a lifetime, decent care and replacement service ensure a longer lifespan.

  • Regular brake service

According to most expert mechanics, it’s essential to take a brake service at least once per year. It’ll ensure a safe drive. Make sure to take it from a reliable and authentic shop to take care of all the parts correctly.

Aside from brake parts, you may need to replace brake lines, rotors, or calipers. Replacing brake fluid might also be necessary.

  • Road Conditions

The location you regularly drive your vehicle may impact your car brake rotors. Driving in city areas involves stop-and-go traffic.

 On the other hand, long straight roads are driver-friendly since you don’t need to stop frequently.

When passing Steep descents areas, you need to be more conscious of using the brake system. It creates a lot of pressure while going from the upper level to the lower level.

  • How Drivers Drive

Not everyone drives in the same way. Some people are conscientious while driving, and few don’t care about anything.

The quality of calipers will deteriorate over time if you’re too irresponsible while driving. Don’t stop instantly. It creates excessive pressure on the brake system. Do it smoothly and slowly.

  • Brake Components’ Quality

High-quality brake components last longer and don’t prone to get damaged easily. Installing carbon-ceramic brakes is the best option. But they’re pretty expensive, and more than half the shops don’t sell them.

However, steel or decent-quality materials are also suitable to use. They’re compatible with most car wheels and readily available.

If you don’t consider this factor cautiously, you’ll have to replace the brake pads and rotors early. Several indications will show up after a particular time.


  • Is it easy to change brake pads?

Though most car owners prefer to have professional services for changing brake pads, it’s not an impossible task.

You can do it if you’ve decent mechanical knowledge. Make sure to raise the wheels to find the brake pad location and adequately work on brake rotors and pads.

  • How long does it take to change brakes and rotors?

Changing brakes and rotors may need thirty minutes to 1 hour or more based on the car conditions and the service quality. When you replace several components of brakes and rotors, it may take additional time.

brake pad replacement

  • Are front and rear brake pads the same?

No, they’re different. Front brake pads feature wear grooves, while there are no wear groves for the rear brake pads. Wear groves are not used for replace brakes because back pads are thicker than front pads.

  • How long does it take to do a full brake job?

It may take around 45 minutes to one hour to do a whole brake job with all the necessary tools and equipment. But it may take more time when several brake system components are damaged.

  • Should you replace all 4 brake pads at once?

Though it’s better to replace all  brake pads at once, it’s not mandatory. Front brakes are prone to damage and require regular replacement than rear wheels because front brake pads perform more tasks. You should check the brake pad thickness before replacing those.

Finishing Up

Regularly changing brake pads is necessary when you drive your vehicle every day in challenging environments.

Make sure to get the work done from a reliable mechanical shop, even if they charge more. They will carefully take care of the vehicle parts while giving you the best quality service. Most importantly, they’ll install high-quality components to ensure longer service life.

Hopefully, you got a clear overview of how long does brake pad replacement take. Drive cautiously and be safe!


Mr. Rubel is an Engine Mechanic. He has more than 15 years’ experience on repair and maintenance of different kinds of vehicles. He is also providing training to mechanics and works as a Senior Mechanic of a well-known organization. He is sharing his knowledge to support the car lovers to solve the vehicle issues.

Recent Posts