How Much Does It Cost to Fix P0011? Causes & Solution

Have you been experiencing engine trouble with your car? It could be p0011 that is the culprit. This code often indicates a problem with the camshaft position sensor, variable valve timing or insufficient engine oil pressure.

The good news is that this issue is typically easy and affordable to fix. In this blog post, we will give you an idea of how much does it cost to fix P0011. Also, what are the causes & symptoms related to the P0011 code?

Keep in mind that these prices are just estimates and may vary depending on the specific vehicle and type of repair needed.

how much does it cost to fix P0011

What Does the Code P0011 Mean?

P0011 works as an OBD-2 generic code which demonstrates the ECM, short for Engine Control Module, dictates whether the input camshaft on bank 1 is more advanced as required.

The engine control module (ECM) uses a camshaft oil control valve (OCV) to regulate the amount of lube flow to the engine’s variable valve timing system. The ECM sends a reference signal to the camshaft position sensor when the engine is idling. The sensor then sends a call back to the ECM.

Based on this return signal, the ECM calculates engine speed and synchronizes fuel injector timing. If the engine speed is too high or low, or if there is a problem with the synchronization, the ECM will set code P0011. In most cases, this is an issue with V6 or V8 engines having variable valve timing (VVT), variable timing for camshaft (VCT), or a combination.

This code is set when the ECM sees the OCV is not functioning correctly or there is an engine oil pressure problem.

Meaning of P0011 Fault Code?

Here is the meaning of the P0011 DTC code:

P0011: “A” Camshaft Position Timing Over-Advanced or System Performance (Bank 1).


  • P means = Powertrain Code Problem.
  • 0 means = SAE – Generic.
  • 0/1/2 means = Fuel and Air Metering.
  • 1 means = Camshaft Position. 

How Much Does It Cost to Fix P0011?

The average cost to fix error code P0011 is between $40 and $2000. These prices will vary depending on the vehicle and the required repair type. This price includes labor costs, ranging from $20 to $500. The parts needed to fix this problem will typically cost between $30 and $1500.

If you change the oil and oil filter, it may cost you around $40 to $100. Changing the camshaft sensor will cost you between $50 and $80. But, if you need to change the camshaft or actuator, it will cost you from $200 to $1500. Besides, you need to expense labor costs according to the job.

If you are experiencing engine trouble with your car, it’s good to get it checked out by a qualified mechanic as soon as possible. They will diagnose the problem and let you know how much it will cost to fix it.

Causes of Code P0011

There are many potential causes of the P0011 code. Here are some of the most common:

Faulty Camshaft Position Sensor

The ECM receives information about the camshaft position from the sensor. Incorrect operation of this sensor can result in the ECM reporting a P0011 error code.

Damaged or Worn Camshaft

A damaged or worn camshaft can also cause this code to be set.

Faulty Oil Control Valve

The oil control valve regulates the lubricant flow to the engine’s variable valve timing system. If this valve is not working correctly, it can cause the code to set engine code p0011.

Incorrect viscosity of oil

Too much lubricant thickness might cause the fluid valve problems. This may lead to the setting of the code.

Dirty Engine Oil

If there are foreign objects in the oil, it can cause problems with the regulating valve.

Symptoms of Code P0011

The severity of these symptoms can vary greatly. They include:

Check Engine Light is On

If the check engine light is on, it’s a sign of a problem with the vehicle’s emission control system. Also, the light may flash on and off or stay on constantly.

Engine Misfire

If the engine is misfiring, the fuel is not being burned correctly. It can lead to a loss of power and decreased fuel economy. Because the engine is not running as efficiently as it should be, it can also cause an increase in emissions.

Rough Idle

Several things can cause rough idle, but it is often the result of an engine not running smoothly.

Decreased Fuel Economy

If the vehicle’s fuel economy decreases, the engine is not running as efficiently as it should be. A problematic fuel injector or a dirty air filter are some reasons that can cause this occurrence. You may also face p0300 code.

Hard Starting

If the engine is having difficulty starting, it could be an indication that there is a problem with the camshaft position sensor.


Know that the engine is stalling if it shuts off unexpectedly. Several different things can cause this, but it is often the result of an issue with the sensor.

How to Diagnose and Solve Code P0011?

There are a few different ways to diagnose and solve code P0011. Here is the step-by-step process:

Check the Camshaft Position Sensor

The first thing you’ll want to check the camshaft position sensor. You can do it with a multimeter. It is necessary to replace the sensor if it is not functioning correctly.

Change Oil and Filter

If the lubricant is old or dirty, it can cause the oil regulating valve problems. It can lead to set the code. The best way to solve this problem is to change the motor oil and filter. 75% of the time, this will fix the problem.

Reset Code & Drive

The code will need to be reset now that the problem has been fixed. This can be done with an OBD2 scanner. Once you reset the code, the precaution signal guiding you to check the light, should turn off.

You can take the car for a drive and see if the problem has been solved. If it has, then great! If not, then go to the following process.

Inspect the Wiring for Any Flaws

If the code is still being set, the next step is to inspect the wiring for any flaws. All the wiring should be checked, including the harnesses. If any of the wirings is damaged, it will need to be replaced. If requires you can use Tuner to adjust functions.

Check for Vacuum Leaks

If there are any vacuum leaks, you should fix them. Otherwise, it can cause problems with the engine’s intake and exhaust valves.

Replace Oil Control Valve

The camshaft oil control valve replacement is necessary if the problem persists.” Most mechanics can perform this easy task.


Is It Safe to Drive with the P0011 Code?

Generally, it is safe to drive with the P0011 code, but it is not advisable. The reason is that the engine is not running as efficiently as possible. It can lead to decreased fuel economy and an increase in emissions.

Will Changing the Oil Fix P0011?

In most cases, yes. Changing the oil and filter is often all that is needed to fix the P0011 code. However, if the problem is more serious, it may need to be addressed with a more expensive repair.

oil change reduces code p0011

Can Too Much Oil Cause P0011?

Apparently Yes! If there is too much oil in the engine, it can cause the valve to stick. The best way to fix this problem is to change the lubricant and filter.

What Causes a Camshaft Position Sensor to Go Bad?

A few different things can cause the sensor to become faulty. The most common causes are simply age and wear. Other causes include dirt, debris, and oil build-up.

What Does Variable Valve Timing Do?

VVT is a mechanism that allows the engine to enhance performance and efficiency by changing the timing of the valves. It does this by altering the timing of the intake and exhaust valves.


That’s all you need to know about how much does it cost to fix p0011. In most cases, it’s a relatively inexpensive fix. However, if you have a more severe problem, it could cost several thousand dollars to repair. Either way, it’s crucial to get the issue diagnosed and repaired as soon as possible to avoid any further damage to your engine.

 Also, keep in mind that the cost of repairs can vary depending on the model of your vehicle. So, if you’re concerned about the price, be sure to ask your mechanic for an estimate before having any work done.


Mr. Rubel is an Engine Mechanic. He has more than 15 years’ experience on repair and maintenance of different kinds of vehicles. He is also providing training to mechanics and works as a Senior Mechanic of a well-known organization. He is sharing his knowledge to support the car lovers to solve the vehicle issues.

Recent Posts